Suntech ST940

Manufacturer:

Suntech ST940 is a portable GPS tracker with waterproof and damage-resistant casing, a convenient size and a powerfull 1500mAh build-in battery, which allows it to be used for various purposes, including asset and personal tracking.

Suntech ST940 description

Location and tracking

Device support GPS with continuous mode.

Mobile networks

Standard Quad-band 850/900/1800/1900 Mhz, no 3G support

Power supply

Powerfull 1500 mAh build-in battery allow for a long operation time before recharging. Estimated operaion time with 30 minutes report interval is 335 hours.

Emergency button

Device feature integrated SOS button which can be used any time for sending emergency signals to the server.

Local and remote management

Internal memory

The device have an internal memory that can store up to 2000 locations in case the connection to the server is temporarily lost.

LED Indication

The device have LED indicator to display GPRS, GPS and charging status

Accessories

Charging adapter

USB cable (for charging and configuration)

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47728
Housing
Weight88 g (3.1 oz.)
Size50.5x75x22.5 mm (1.99x2.95x0.89 in)
Hardware features
Emergency buttonFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47728

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

ST910;NETWORK;1234567890;0;{apn};{apn_user};{apn_pass};{server_hostname};47728;;;1;;
ST910;ADP;1234567890;T;T;0;47728;0;0;0;0;0;0

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Suntech ST940”

Related Articles

2018, TelematicsTalks powered by Navixy | About