CAREU U1 Plus

Manufacturer:

CAREU U1 Plus is a cost-effective and easy-to-install GPS tracking device. It features RS232 interface and 1-Wire interface temperature and i-Button driver ID function. It is an ideal solution for everyday fleet tracking management.

CAREU U1 Plus description

CAREU U1 Plus is a cost-effective and easy-to-install GPS tracking device.

Packaging content:

  • U1 Plus tracking device
  • User manual

Features:

  • Cost effective and easy installation
  • Two-ways voice communication*
  • Data communications by UMTS/HSPA/GPRS/EDGE, SMS, FTP, USSD
  • Support GPS/ Glonass*/ BDS*/ Galileo* Satellite System
  • Built-in 6-axis accelerometer
  • Support harsh acceleration/ harsh braking/Impact detection/ harsh cornering/ Flip over detection
  • Support 1-Wire® interface temperature function and i-Button driver ID
  • RS232 interface for rich accessories supporting, Fuel level sensor, RFID reader, Barcode, and so on.
  • Support Garmin FMI 2.0 operation
  • Geofence report in circular and polygonal types
  • Remote configuration
  • Configurable real-time tracking
  • Intelligent power management
  • GPS Odometer data reading and flexible user-defined reports
  • FOTA firmware via FTP
  • Power low/lost alarm
  • GSM jamming detection
  • GPS antenna tamper detect alarm
  • Maximum 100,000 data logs

(*) Optional

Applications:

  • Fleet tracking
  • Vehicle security/rescue/anti-hijack
  • Mobile asset tracking
  • Fleet management
  • Location based service

Specifications:

Communication Specification

  • Frequency 2G/GSM:Quad band, 850/900/1800/1900 MHz 3G/ UMTS/HSPA:850/900/1900/2100 MHz
  • Data Protocol:TCP, UDP

GNSS Performance

  • Datum:WGS-84
  • Receiver type:72 channels ‧Sensitivity:-160 dBm; 26s

Power Consumption:

Operating Temperature: -20℃~+70℃ (-4℉~158℉)

Serial Ports:3 x RS-232 Port (Configurable baud rate), 1xRS-485

Input Ports:

  • 1 x ACC/Ignition Input
  • 4 x Digital Inputs (2 x Positive trigger & 2 x Negative triggers)
  • 2 x Analog Input (12-bit resolution)
  • 1 x 1-Wire® Input

Output Ports:4 x Outputs (Max. sink current 300mA)

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port46986
General information
PurposeVehicle
InstallationProfessional
Housing
Weight80 g (2.82 oz.)
Size72x104.1x26.8 mm (2.83x4.1x1.06 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G, 3G
Interfaces
1-Wire interface
RS232 interfaceFeature already supported
Feature already supported in
Number of RS232 interfaces3
Feature already supported in
RS485 interfaceFeature already supported
Feature already supported in
Number of outputs4
Feature already supported in
Number of inputs (all types)5
Feature already supported in
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity800 mAh
Feature already supported in
Built-in batteryFeature already supported
Feature already supported in
Internal temperature sensorFeature already supported
Feature already supported in
Hardware extras
Fuel level sensor readingFeature can be supported upon request
Feature can be supported upon request
External temperature sensor readingFeature can be supported upon request
Feature can be supported upon request
Tracking features
Tracking modesContinuous
Feature can be supported upon request
OdometerFeature already supported
Feature already supported in
ECO drivingFeature can be supported upon request
Feature can be supported upon request
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Firmware update OTA
Feature already supported in
Certification
CE
Feature already supported in
FCC
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port46986

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

AT$MODID={ID}
AT$APN={apn},{apn_user},{apn_pass}
AT$HOSTS=1,0,217.23.132.215,46986
AT$SAVE

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “CAREU U1 Plus”

2018, TelematicsTalks powered by Navixy | About