CAREU UW1

Manufacturer:

CAREU UW1 is an advanced and highly customizable vehicle tracker that provides a reliable and cost-effective solution for your tracking needs. From a adding support of different satellites systems to adding new interfaces, this tracker allows you to have only the features you need.

CAREU UW1 description

CAREU UW1 is an advanced and highly customizable vehicle tracker that provides a reliable and cost-effective solution for your tracking needs. From a adding support of different satellites systems to adding new interfaces, this tracker allows you to have only the features you need.

Location and tracking

  • GPS
  • Optional support of Glonass, BDS, and Galileo
  • Interval and continuous tracking modes

Mobile networks

  • 2G/GSM: Quad band, 850/900/1800/1900 MHz
  • 3G/ UMTS/HSPA: B1,B2,B5,B18,B19
  • 4G CAT1 B1, B2, B3, B4, B5, B7, B8, B12, B13, B19, B20, B28

Power supply

  • Build-in battery Li-ion 900 mAh

Inputs and outputs

  • 1 analog Input
  • 3 digital Inputs (1 positive trigger, 2 negative triggers)
  • 2 outputs
  • 1-Wire interface
  • USB port

Other features

  • IP67 waterproofing
  • Operating temperature -20℃~+70℃
  • Optional CAN, RS232 interface

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port46986
General information
PurposeVehicle
InstallationProfessional
Housing
Weight155 g (5.47 oz.)
Size81x64x31 mm (3.19x2.52x1.22 in)
Waterproof classIP67
GNSS Location
GPS
GLONASSOptional
GalileoOptional
BeidouOptional
Assisted GPS
Connectivity
Cellular network typeGSM 850/900/1800/1900
Cellular network generation2G, 3G, 4G
Interfaces
1-Wire interface
RS232 interfaceOptional
Number of outputs2
Number of inputs (all types)4
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Hardware features
Battery capacity900 mAh
Feature already supported in
Built-in battery
Feature already supported in
Tracking features
Tracking modesContinuous, Interval
Feature already supported in
OdometerFeature already supported
Feature already supported in
ECO drivingFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Car crashFeature already supported
Feature already supported in
Device switched on/offFeature already supported
Feature already supported in
Self monitoring
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature can be supported upon request
Feature can be supported upon request
Internal battery levelFeature can be supported upon request
Feature can be supported upon request
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs control
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port46986

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending SMS/GPRS commands to the device.

SMS commands:

AT$MODID=1234567890
AT$APN={apn},{apn_user},{apn_pass}
AT$HOSTS=1,0,{server_ip},46986
AT$SAVE

The <APN> parameters depend on your GSM carrier.

GPRS commands:

AT$IPTYPE=1
AT$FORMAT=1
AT$PDSR=28,300,100,10,3
AT$GPRSEN=1,1
AT$HB=290,0
AT$PACKAGE=1,0
AT$POWEREN=1,1,3
AT$RFIDC=2
AT$IBDETEN=1,3
AT$LPRC=15,3
AT$IMPEN=1,3
AT$IDLEEN=1,3
AT$TOWEN=1,3
AT$PWRM=12,0,0,40,12,0,2,12
AT$SAVE

Reviews

There are no reviews yet.

Be the first to review “CAREU UW1”

2018, TelematicsTalks powered by Navixy | About