TelcomIP Patrol Scan V2-5

Manufacturer:

Patrol Scan V2-5 is a GPS tracker perfect for simple vehicle tracking needs.

TelcomIP Patrol Scan V2-5 description

Patrol Scan V2-5 is a GPS tracker perfect for simple vehicle tracking needs.

Location and tracking

  • GPS
  • Continuous tracking mode

Mobile networks

  • GSM 850/1800/1900
  • 2G

Power supply

  • Build-in 1000 mA battery
  • External power supply DC 9V – 12V

Inputs and outputs

  • 2 discrete inputs
  • 2 discrete outputs

Other features

  • Emergency button
  • LED indication

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47667
General information
PurposeVehicle
InstallationNot required
Housing
Size130x90x40 mm (5.12x3.54x1.57 in)
GNSS Location
Internal antenna (GNSS)
GPS
GLONASS
Connectivity
Cellular network typeGSM 850/1800/1900
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs2
Number of inputs (all types)2
Discrete inputsFeature can be supported upon request
Feature can be supported upon request
Hardware features
Battery capacity1000 mAh
Feature can be supported upon request
Built-in batteryFeature already supported
Feature already supported in
Emergency buttonFeature already supported
Feature already supported in
Hardware extras
Emergency buttonFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
Self monitoring
GNSS signal levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47667

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

.set..2,{apn},{apn_user},{apn_pass}*
.set..3,1,{server_ip},47667*
.gprstipo..0.

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “TelcomIP Patrol Scan V2-5”

2018, TelematicsTalks powered by Navixy | About