OGT100 is a miniature OBD GPS tracker with built-in antennas, which can be easily installed and will work out of the box.
OGT100 is a miniature OBD GPS tracker with built-in antennas, which can be easily installed and will work out of the box.
Location and tracking
Mobile networks
Power supply
Inputs and outputs
| Server IP Address | 217.23.132.215 |  |
| Server port | 47738 | |
| Purpose | Vehicle | |
| Installation | DIY | |
| Internal antenna (GNSS) | | |
| GPS | |
| Cellular network type | GSM Quad Band | |
| Internal antenna (Connection) | | |
| Cellular network generation | 2G | |
| Tracking modes | Continuous, Interval | |
| ECO driving |  |
| Network signal level | | |
| GNSS signal level | |
| Server IP Address | 217.23.132.215 |
| Server port | 47738 |
The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.
You also need to keep the device with initial factory settings, in particular:
In case automatic activation failed, you can try to register the device manually by sending following commands to the device:
W000000,011,{apn},{apn_user},{apn_pass}
W000000,012,{server_ip},47738
W000000,013,1
The <APN> parameters depend on your GSM carrier.
2019, TelematicsTalks powered by Navixy | About
Reviews
There are no reviews yet.