Topten TK228

Model: Topten TK228

Manufacturer:

TK228 is the combination of GPS Tracker + RFID Car Alarm + Remote/Bluetooth Diagnostics. It is is an advanced & cost-effective solution for vehicle security, real-time tracking & fleet management.

Topten TK228 description

TK228 is a multifunctional product. It is an integration of OBD-II GPS tracker, Remote/Bluetooth Diagnostics and wireless immobilizer. It has plug & play design, which is compatible with all the cars with OBD-II connector.

Features

  • Arm/disarm by SMS/phone call;
  • Anti-tamper alarm;
  • Built-in shock sensor;
  • Wireless immobilizer to stop the car in safe mode.

Package content

  • GPS tracker;
  • RFID tag;
  • Wireless immobilizer.

Location and tracking

TK228 tracking is based on GPS signals only. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).

Tracking modes in TK228 model are:

  • time/interval tracking
  • direction variation tracks
  • distance interval tracks

Mobile networks

With Quad-band GSM 3G/4G module TK228 can be operated all over the world.

Power supply

External power supply might be 9-45V, which makes it possible to install TK228 both on cars and vans. TK228 also features a built-in rechargeable backup battery. When fully charged it ensures about 4-6 hours of device operation (in normal conditions).

Remote management

TK228 tracker can be fully controlled over GPRS. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

LED indication

TK228 has LED indication for GPS and GSM status.

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47738
General information
PurposeVehicle
InstallationProfessional
Housing
Weight73 g (2.58 oz.)
Size54x51.5x28.5 mm (2.13x2.03x1.12 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs1
Number of inputs (all types)1
ACC/Ignition inputFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware extras
Driver ID readingFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
OdometerFeature already supported
Feature already supported in
Self monitoring
External power source voltageFeature already supported
Feature already supported in
CAN/OBDII reading
CAN/OBDII reader typeFeature already supported
Feature already supported in
CAN/OBDII parametersFuel level, fuel consumption, engine RPM, throttle position, speed, engine load, coolant temperature, DTC error codes and other
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Device ID typeStatic (IMEI)
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request
Certification
CE
Feature can be supported upon request
FCC
Feature can be supported upon request

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47738

Activation process

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

When you activate a device, the following SMS command is sent from server to device:

111111WWW:APN:apn,user,password;IPN:217.23.132.215;COM:47738;RPT:30;SLP:180;GPRS:1;

Manual configuration
If you experience issues with the SMS delivery from the platform to device in your country, you can setup device manually by sending the above list of commands from your mobile phone.

Reviews

There are no reviews yet.

Be the first to review “Topten TK228”

2019, TelematicsTalks powered by Navixy | About