Wireless Links Piccolo ATX

Manufacturer:

Piccolo ATX is an advance asset tracking device. Two standard Type C High Current lithium batteries allow it to stay working up to 5 years.

Wireless Links Piccolo ATX description

Piccolo ATX is an advance asset tracking device. Two standard Type C High Current lithium batteries allow it to stay working up to 5 years.

Location and tracking

  • GPS
  • interval tracking mode
  • LBS

Mobile networks

  • GSM/GPRS or EDGE/HSPA+ (3G) or 4G LTE, CAT-1, CATMGSM/GPRS or EDGE/HSPA+ (3G) or 4G LTE, CAT-1, CATM
  • 2G / 3G /4G

Power supply

  • 2 C size high current lithium batteries

Inputs and outputs

  • 1 optional discrete input

Other features

  • 3 mounting options – magnet, tape, and screws
  • Operating Temperature: -30° to 80°C
  • Storage Temperature: -40° to 105°C
  • IP67 waterproof case

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47671
General information
PurposeAsset
InstallationDIY
Housing
Weight170 g (6 oz.)
Size132x82x34 mm (5.2x3.23x1.34 in)
Waterproof classIP67
Magnet mounting
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of inputs (all types)1
Discrete inputsFeature already supported
Feature already supported in
Hardware features
Built-in batteryFeature already supported
Feature already supported in
Internal temperature sensorFeature already supported
Feature already supported in
Tracking features
Tracking modesInterval
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Forced LBS location update over GPRSFeature already supported
Feature already supported in
Forced GNSS location update over SMSFeature already supported
Feature already supported in
Certification
CE
Feature already supported in
FCC
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47671

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

SET/1234:TCPHOST={server_ip},47671;MODEMAPN={apn};USERPASSWD={apn_user},{apn_pass}

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Wireless Links Piccolo ATX”

2018, TelematicsTalks powered by Navixy | About