Wireless Links Piccolo Hybrid+

Manufacturer:

Piccolo Hybrid+ is a portable device suitable both for vehicle and asset tracking. Waterproofing and a wide temperature range make it extremely durable. The tracker is easy to mount, with 3 options available – magnet, tape, and screws.

Wireless Links Piccolo Hybrid+ description

Piccolo Hybrid+ is a portable device suitable both for vehicle and asset tracking. Waterproofing and a wide temperature range make it extremely durable. The tracker is easy to mount, with 3 options available – magnet, tape, and screws.

Location and tracking

  • GPS – MTK 66 Channels
  • Interval and continuous tracking modes
  • LBS

Mobile networks

  • 2G Quad-Band, 3G European: 900/1800/2100 or 3G US 850/1900 MHZ
  • 2G / 3G /4G

Power supply

  • Build-in 7800 mA battery
  • When connected to an external power, battery will automatically recharge

Inputs and outputs

  • 2 digital inputs
  • 1 analog input

Other features

  • Local and remote management
  • IP67 waterproofing
  • Magnet, tape or screw mounting
  • Operating Temperature: -30º to 80º C
  • Storage Temperature: -40º to 105º C

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47671
General information
PurposeAsset, Vehicle
InstallationDIY, Not required
Housing
Weight105 g (3.7 oz.)
Size125x87x41 mm (4.92x3.43x1.61 in)
Waterproof classIP67
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G, 3G, 4G
Interfaces
Number of inputs (all types)3
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Hardware features
Battery capacity7800 mAh
Feature already supported in
Built-in batteryFeature already supported
Feature already supported in
Internal temperature sensorFeature already supported
Feature already supported in
Hardware extras
External temperature sensor reading
Feature already supported in
Tracking features
Tracking modesContinuous, Interval
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
CAN/OBDII reading
CAN/OBDII parametersFuel consumption, Engine RPM, Engine load, DTC errors
Feature already supported in
DTC codes readingFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Forced LBS location update over GPRSFeature already supported
Feature already supported in
Forced GNSS location update over SMSFeature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47671

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

SET/1234:TCPHOST={server_ip},47671;MODEMAPN={apn};USERPASSWD={apn_user},{apn_pass}

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Wireless Links Piccolo Hybrid+”

2018, TelematicsTalks powered by Navixy | About