Wireless Links Piccolo Plus

Manufacturer:

Piccolo Plus is an extremely advanced vehicle tracker. It can read CANbus OBDII, K-Line, J1939, and J1708 data and track driver behavior. It also functions as an in-cabin WiFi Hotspot and a wireless router allowing communication of any mobile device to the internet.

Wireless Links Piccolo Plus description

Piccolo Plus is an extremely advanced vehicle tracker. It can read CANbus OBDII, K-Line, J1939, and J1708 data and track driver behavior. It also functions as an in-cabin WiFi Hotspot and a wireless router allowing communication of any mobile device to the internet.

Location and tracking

  • GPS
  • Interval and continuous tracking modes
  • LBS

Mobile networks

  • 2G Quad-Band, 3G European: 900/1800/2100 or 3G US 850/1900 MHZ
  • 2G / 3G /4G

Power supply

  • Build-in 1000 mA battery

Inputs and outputs

  • 3 digital inputs
  • +3 digital inputs (optional)
  • 1 analog input
  • +1 analog input (optional)
  • 1 digital output
  • +1 digital output (optional)

Other features

  • Built-in WiFi Hotspot
  • Emergency button
  • Local and remote management
  • Flame retardant ABS/PC IP31 case
  • Operating Temperature: -30° to 80°C
  • Storage Temperature: -40° to 105°C

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47671
General information
PurposeVehicle
InstallationDIY
Housing
Weight110 g (3.88 oz.)
Size100x58x30 mm (3.94x2.28x1.18 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G, 3G, 4G
WiFi
Interfaces
RS232 interface
Number of outputs1
Number of inputs (all types)4
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Hardware features
Battery capacity1000 mAh
Feature already supported in
Built-in batteryFeature already supported
Feature already supported in
Emergency buttonFeature already supported
Feature already supported in
Internal temperature sensorFeature already supported
Feature already supported in
Hardware extras
Driver ID readingFeature already supported
Feature already supported in
External temperature sensor readingFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous, Interval
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
ECO drivingFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
CAN/OBDII reading
CAN/OBDII parametersFuel consumption, Engine RPM, Engine load, DTC errors
Feature already supported in
DTC codes readingFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs control
Feature already supported in
Forced LBS location update over GPRSFeature already supported
Feature already supported in
Forced GNSS location update over SMSFeature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47671

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

SET/1234:TCPHOST={server_ip},47671;MODEMAPN={apn};USERPASSWD={apn_user},{apn_pass}

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Wireless Links Piccolo Plus”

2018, TelematicsTalks powered by Navixy | About