XiLi Technologies PT100

Model: XiLi Technologies PT100

Manufacturer:

XiLi Technologies PT100 is a multifunctional GPS collar designed for pets

XiLi Technologies PT100 description

XiLi Technologies PT100 is a multifunctional GPS collar designed for pets

Features

  • Real-time tracking;;
  • Historical route;
  • Geo-fence;
  • Voice monitoring.

Package content

  • GPS unit;
  • Collar;
  • Packaging Box.

Location and tracking

PT100 tracking is based on GPS signals only. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking). Supports real time tracking at intervals.

Mobile networks

With Quad-band GSM 2G module PT100 can be operated all over the world.

Power supply

PT100 also features a built-in rechargeable backup battery. When fully charged it ensures about 5 days of device operation (in normal conditions).

Remote management

PT100 tracker can be fully controlled over GPRS. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47713
General information
PurposePet
InstallationNot required
Housing
Weight100 g (3.53 oz.)
Size96x50x31.5 mm (3.78x1.97x1.24 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Tracking features
Tracking modesContinuous
Location by Cell IDFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature already supported
Feature already supported in
Certification
CE
Feature already supported in
FCC
Feature already supported in
EAC
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47713

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

pw,123456,APN,{apn},{apn_user},{apn_pass},#
pw,123456,IP,tracker.navixy.com,47713#

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “XiLi Technologies PT100”

2019, TelematicsTalks powered by Navixy | About