Xirgo XT2460G OBDII

Manufacturer:

Xirgo XT2460G is the most versatile and economical diagnostic & monitoring device available today for communicating vital vehicle information to owners via ubiquitous UMTS networks.

With an integrated GPS engine, cellular and GPS antennas, and integrated OBDII interface, the XT2460G is the ultimate solution for fleet managers in need of monitoring location, speed, and many other codes available on the OBD port of vehicles.

Xirgo XT2460G OBDII description

Xirgo XT2460G is the most versatile and economical diagnostic & monitoring device available today for communicating vital vehicle information to owners via ubiquitous UMTS networks.

With an integrated GPS engine, cellular and GPS antennas, and integrated OBDII interface, the XT2460G is the ultimate solution for fleet managers in need of monitoring location, speed, and many other codes available on the OBD port of vehicles.

Location and tracking

Xirgo XT2460G is embedded with GPS and doesn’t have support of GLONASS and alternative systems. It either doesn’t support Assisted GPS (A-GPS) technology.

With a highly sensitive GPS engine along with an integrated GPS antenna and multiple OBDII protocols supported, Xirgo XT2460 3G can be installed in majority of vehicles that ware manufacture from 1996 and up.

Mobile networks

With Six-band GSM 3G module Xirgo XT2460G can be operated all over the world both in 2G and 3G networks.

Features

In addition to support for open OBD II standard parameters the XT2460G has additional functionality to support OEM proprietary parameters. This gives our customers unrivaled versatility for providing additional information from the vehicle BUS such as true odometer and seat belt status.

With an integrated J1962 connector, an extremely compact design powered through the OBD port, and low power consumption, the XT2460G can be installed in a matter of seconds which substantially reduces installation cost.

Xirgo XT2460G has following features:

  • 3G Network (UMTS/HSPA)
  • 3G Bands 850/1900 MHz
  • LED status indicators for GPS lock, GSM registration and OBD II communication
  • Over-the-air firmware upgrade
  • Supports SMS, UDP, FTP
  • Supports all J1962 OBD Pins
  • 3-axis Accelerometer and Motion Detector
  • Integrated GPS receiver and antenna for tracking applications
  • Audible Feedback (Buzzer)
  • Optional 250 mAh backup battery

Power supply

External power supply might be 6-24V, which makes possible to use Xirgo XT2460G with all car models.

Local and remote management

With its highly mature firmware, Xirgo XT2460 3G supports SMS, UDP, FTP and is capable of firmware update and configuration over-the-air.

In case you are not able to configure device over the air, manual management over SMS-commands and configuration software is also available.

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47716
General information
PurposeVehicle
InstallationNot required
Special form factorOBDII Dongle
Housing
Weight55 g (1.94 oz.)
Size45.7x38.1x25.4 mm (1.8x1.5x1 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Six Band
Internal antenna (Connection)
Cellular network generation2G, 3G
Interfaces
ACC/Ignition inputFeature already supported
Feature already supported in
Hardware features
Battery capacity250 mAh
Feature already supported in
Built-in batteryOptional
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
OdometerFeature already supported
Feature already supported in
ECO drivingFeature already supported
Feature already supported in
Events monitoring
External power cut offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature can be supported upon request
Feature can be supported upon request
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature can be supported upon request
Feature can be supported upon request
CAN/OBDII reading
CAN/OBDII parametersFuel level, fuel consumption, engine RPM, throttle position, speed, engine load, coolant temperature, DTC error codes and other
Feature can be supported upon request
Check engine lightFeature already supported
Feature already supported in
DTC codes readingFeature already supported
Feature already supported in
Remote management
Remote device configurationYes (over SMS)Feature already supported
Feature already supported in
Firmware update OTA
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request
Certification
FCC
Feature can be supported upon request

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47716

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

+XT:1002,{apn_user},{apn_pass},{apn}
+XT:1001,47716,{server_ip},1
+XT:3001,1,1,1,1,0
+XT:3003,10
+XT:3007,6,6
+XT:3009,0,1,1
+XT:3010,180,0
+XT:3013,3,15
+XT:3014,1,5,3,0,0

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Xirgo XT2460G OBDII”

2018, TelematicsTalks powered by Navixy | About