Manufacturer:

Zenda-VT1 is a GPS vehicle tracker, used for private vehicle anti-theft, official vehicle anti-theft, and personal tracking management. The tracker supports smart-voice commands for arming/disarming settings, device status query, and location query for a long time.

Zenda VT-1 description

Zenda-VT1 is a GPS vehicle tracker, used for private vehicle anti-theft, official vehicle anti-theft, and personal tracking management. The tracker supports smart-voice commands for arming/disarming settings, device status query, and location query for a long time.

Package contents

Zenda VT-1 package contains the following device/accessories:

  • Device with a built-in battery
  • Power/IO Cable
  • USB Cable
  • Quick Installation guide

Product features:

  • GPS + GSM dual-module tracking
  • Real-time location query
  • Track by time interval
  • Track by distance
  • Track by mobile phone
  • Speeding alarm
  • Direction change alarm
  • Geo-fence
  • SOS alarm
  • GPS antenna cut-off alarm
  • External power cut-off alarm
  • GPS blind spot alarm
  • Remote engine cut-off alarm
  • Engine or vehicle door status alarm
  • Towing alarm
  • Arming or disarming
  • SMS/GPRS (TCP/UDP) communication (ZENDA protocol)
  • Built-in 1 MB buffer for storing 5,000 GPRS cache and 128 SMS cache
  • Mileage report
  • Low battery alarm
  • Smart sleep mode
  • Smart voice setting

Location and tracking

Zenda VT-1 is embedded with GPS. It does not support A-GPS, or GLONASS technology.

As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).

Mobile networks

Zenda VT-1 has a Quad-band GSM 2G module that allows to operate it all over the world.

Power supply

External power supply might be 11-36V, which makes possible to use Zenda VT-1 with all car models.

Sleep mode

Zenda VT-1 features the Smart Sleep mode

The smart sleep function works in conjunction with the following.

Scenario 1: When the ACC detection line has not been used.

With no interruption for consecutive 15 minutes, the tracker enters smart sleep mode. In this way, the GPS module stops work, and the tracker stops uploading data. Heartbeat reports about GPS invalid will be sent to the platform every 60 minutes (the default interval can be changed). If vibration occurs, the tracker will awake and continue to operate and report data at the specific interval. Heartbeat reports will be also resumed.

Scenario 2: When the ACC detection line has been connected.

If the ACC is on, the tracker will operate normally and report data at the specific interval.
If ACC is off, without any vibration, the tracker immediately enters smart sleep mode (as same as Scenario 1); Heartbeat reports about GPS invalid will be sent to the platform every 60 minutes (the default interval can be changed). If vibration occurs or the engine starts, the tracker will awake and continue to operate and report data at the specific interval.

Note:

  • When the tracker is being charged with a USB cable, it will operate normally, but will not enter smart sleep mode.
  • Under smart sleep, the tracker has low power consumption. The tracker with built-in battery can sustain up to about 50 hours.

Local and remote management

Zenda VT-1 can be fully controlled over GPRS. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS. 

LED Indication

Zenda VT-1 model has three LEDs:

  • Power LED – indicates power status
  • GPS LED – indicates GPS signal
  • GSM LED – indicates GSMS signal

Accessories

The manufacturer also offers original accessories, such as:

  • Buzzer
  • GPS Antenna
  • Audio cable + Microphone

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47752
General information
PurposeVehicle
InstallationProfessional
Housing
Weight65 g (2.29 oz.)
Size70.5x54x19.5 mm (2.78x2.13x0.77 in)
GNSS Location
Internal antenna (GNSS)
External antenna (GNSS)Optional
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs2
Number of inputs (all types)4
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity350 mAh
Feature already supported in
Built-in batteryFeature already supported
Feature already supported in
Hardware extras
Emergency buttonFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
Smart power consumptionFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Antenna cut offFeature already supported
Feature already supported in
SIM card slot openFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Certification
EAC
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47752

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

0000,A21,1,217.23.132.215,47752,<apn>,<apnUser>,<apnPass>

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Zenda VT-1”

2018, TelematicsTalks powered by Navixy | About